External wall insulation · Northern Ireland
External wall insulation in County Armagh
We provide external wall insulation across County Armagh, including Craigavon, Lurgan and Portadown, with a free survey and fixed written price. For homes in County Armagh, the survey starts with the wall itself: solid brick, stone or concrete, and whether any old render is sound enough to insulate over.
- Free survey and fixed written price
- Guide price from £105 per m² + scaffold, 0% VAT
- Planning and building control checked for Northern Ireland
Free survey in County Armagh
Tell us the postcode and what you need.
Included as standard
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Covers tired brick, pebble dash or failing render with a new finish
- Work happens outside, so you can live at home throughout
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
Homes and walls in County Armagh
Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.
Exposure to wind-driven rain varies across County Armagh: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Whole-house jobs and single elevations are both quoted in County Armagh; a cold gable or rear wall can be done on its own where it suits.
- Nation
- Northern Ireland
- Region
- Northern Ireland
- Towns covered
- Craigavon, Lurgan, Portadown, Armagh
- Guide price
- From £105 per m² + scaffold · 0% VAT
Approvals in Northern Ireland
In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. Changing the external appearance of a house may need permission, and conservation areas, flats, commercial buildings and listed buildings need planning permission or listed building consent. Check with your council's planning office.
Insulating external walls is building work under the Building Regulations (Northern Ireland) 2012, handled by council building control, with Technical Booklet F1 covering conservation of fuel and power in dwellings.
What does the survey check before EWI is specified?
- Wall construction and condition, including any damp, cracking or loose render
- Ground levels and the damp-proof course, so the system starts above splash height
- Eaves depth, verges and whether the roofline needs extending
- Window positions, cill depths and reveal space
- Services on the wall: gas, electric meters, flues, soil pipes, satellite dishes and lights
- Planning and Building Regulations position for your property and nation
External wall insulation prices in County Armagh
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in County Armagh: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
Do you cover all of County Armagh?
Yes. We survey and quote external wall insulation across County Armagh, including Craigavon, Lurgan, Portadown, Armagh.
Do I need planning permission in Northern Ireland?
In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. We check your address before quoting.