Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Solid wall insulation · Northern Ireland

Solid wall insulation in County Armagh

We provide solid wall insulation across County Armagh, including Craigavon, Lurgan and Portadown, with a free survey and fixed written price. For County Armagh homeowners weighing external against internal insulation, the survey sets out both with prices.

  • Free survey and fixed written price
  • Guide price from £75 per m² + scaffold, 0% VAT
  • Planning and building control checked for Northern Ireland

Free survey in County Armagh

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Internal insulation suits single rooms or where the outside can't change
  • Breathable options for stone and lime-mortared walls
  • Solid walls can lose heat roughly twice as fast as an insulated cavity wall
  • External insulation keeps room sizes and treats cold bridges well
  • Both can be done in stages, elevation by elevation or room by room
Victorian end-of-terrace house with dark insulation boards fixed to the lower half of the gable wall behind scaffolding

Before we quote in County Armagh

Northern Ireland has many rendered and pebble-dashed homes, older solid-walled rural houses, and estates built by the Housing Executive.

Exposure to wind-driven rain varies across County Armagh: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For County Armagh homeowners weighing external against internal insulation, the survey sets out both with prices.

Nation
Northern Ireland
Region
Northern Ireland
Towns covered
Craigavon, Lurgan, Portadown, Armagh
Guide price
From £75 per m² + scaffold · 0% VAT

Permissions in Northern Ireland

In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. Changing the external appearance of a house may need permission, and conservation areas, flats, commercial buildings and listed buildings need planning permission or listed building consent. Check with your council's planning office.

Insulating external walls is building work under the Building Regulations (Northern Ireland) 2012, handled by council building control, with Technical Booklet F1 covering conservation of fuel and power in dwellings.

What does solid wall insulation cost?

External systems run at roughly £105–£210 per m² of wall depending on the board and finish. Internal insulation is roughly £75–£130 per m², plus the cost of moving radiators, sockets and kitchen units.

Solid wall insulation prices in County Armagh

Solid wall insulation guide prices
ItemGuide priceNotes
External (EWI)£105–£210 per m²0% VATBy board and finish
Internal (IWI)£75–£130 per m²0% VATPlus making good
Survey and written recommendationFree with a quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Solid wall insulation in County Armagh: questions

Is solid wall insulation worth it?

For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.

Does solid wall insulation cause condensation?

It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.

Can I do one wall at a time?

Yes. Many owners start with the coldest or most exposed elevation, often a gable end.

Do you cover all of County Armagh?

Yes. We survey and quote solid wall insulation across County Armagh, including Craigavon, Lurgan, Portadown, Armagh.

Do I need planning permission in Northern Ireland?

In Northern Ireland, permitted development is set by the Planning (General Permitted Development) Order (NI) 2015. We check your address before quoting.

Solid wall insulation in County Armagh

Send your postcode and we'll arrange a survey in County Armagh.

Call freeGet a quote