External wall insulation · Dyfed
External wall insulation in Aberystwyth
Need external wall insulation in Aberystwyth? Tell us about the property and we'll arrange a free survey and a written quote. We plan EWI in Aberystwyth around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in SY23 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Aberystwyth
Postcode, service and a phone number is all we need.
What the job covers
- Covers tired brick, pebble dash or failing render with a new finish
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Work happens outside, so you can live at home throughout
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
Local considerations in Aberystwyth
We cover Aberystwyth and nearby Llandrindod Wells, Newtown and Carmarthen. Aberystwyth is about 51 miles from Llanelli. West Wales has a high share of older solid-walled and stone homes, many in exposed coastal or rural settings.
Parts of Dyfed fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Whole-house jobs and single elevations are both quoted in Aberystwyth; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- SY23
- County or area
- Dyfed
- Nation
- Wales
- Nearby
- Llandrindod Wells, Newtown, Carmarthen, Welshpool
Wales: planning and regulations
We check Aberystwyth addresses for conservation areas and listing before quoting, because Welsh permitted development rules don't cover every external change.
Welsh Building Regulations expect walls to be upgraded when a substantial area is renewed, and building control signs the work off.
What does the survey check before EWI is specified?
- Wall construction and condition, including any damp, cracking or loose render
- Ground levels and the damp-proof course, so the system starts above splash height
- Eaves depth, verges and whether the roofline needs extending
- Window positions, cill depths and reveal space
- Services on the wall: gas, electric meters, flues, soil pipes, satellite dishes and lights
- Planning and Building Regulations position for your property and nation
External wall insulation prices in Aberystwyth
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Aberystwyth: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Do you cover Aberystwyth?
Yes — we survey and quote external wall insulation in Aberystwyth (SY23) and nearby Llandrindod Wells, Newtown and Carmarthen, with a fixed written price before any work starts.