External wall insulation · Greater Glasgow
External wall insulation in Renfrew
We quote external wall insulation for homes in Renfrew (PA4) and nearby Clydebank and Paisley, with guide prices online and a free survey to fix the price. We plan EWI in Renfrew around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in PA4 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Renfrew
Postcode, service and a phone number is all we need.
What the job covers
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Work happens outside, so you can live at home throughout
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027

Local considerations in Renfrew
We cover Renfrew and nearby Clydebank, Paisley and Bearsden. Renfrew sits around 5 miles from Glasgow. West Central Scotland has sandstone tenements, interwar and post-war council housing including no-fines and other system-built types, and many harled (roughcast) houses.
Parts of Greater Glasgow fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Whole-house jobs and single elevations are both quoted in Renfrew; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- PA4
- County or area
- Greater Glasgow
- Nation
- Scotland
- Nearby
- Clydebank, Paisley, Bearsden, Glasgow
Permissions in Scotland
Scottish householder rules mean many Renfrew jobs that change the outside of a house need a planning application; we confirm the position before quoting.
Scotland's building standards cover changes to external wall construction; we check whether your job in Renfrew needs a warrant.
Which homes is EWI suited to?
EWI is mainly used on solid-walled houses (most homes built before about 1920), on post-war concrete and steel-framed houses, on homes where cavity fill isn't possible, and on bungalows and park homes. It also suits flats and blocks where the whole building is treated at once.
It is less straightforward where the walls face a pavement with no room to project, on listed buildings, or where planning rules want the existing brick or stone left visible. A survey picks these up before you commit.
External wall insulation prices in Renfrew
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Renfrew: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
How much does external wall insulation cost?
Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
Do you cover Renfrew?
Yes — we survey and quote external wall insulation in Renfrew (PA4) and nearby Clydebank, Paisley and Bearsden, with a fixed written price before any work starts.