External wall insulation · Oxfordshire
External wall insulation in Didcot
External wall insulation in Didcot: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. We plan EWI in Didcot around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.
- Free survey in OX11 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Didcot
Postcode, service and a phone number is all we need.
Included as standard
- Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Covers tired brick, pebble dash or failing render with a new finish
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
Local considerations in Didcot
As well as Didcot itself, we quote in Abingdon, Oxford and Thatcham. Didcot is about 10 miles from Oxford. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Whole-house jobs and single elevations are both quoted in Didcot; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- OX11
- County or area
- Oxfordshire
- Nation
- England
- Nearby
- Abingdon, Oxford, Thatcham, Newbury
Approvals in England
Before quoting in Didcot, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
What finish can I have?
Most EWI is finished in a thin-coat silicone render in a through-coloured shade, with a 1–2mm grain. Acrylic, mineral (painted), dry-dash and brick-slip finishes are also available. Where planning wants a brick look, brick slips over the insulation keep the street appearance.
External wall insulation prices in Didcot
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Didcot: questions
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
Can EWI go over pebble dash?
Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.
Does EWI need Building Regulations approval?
In England and Wales, usually. Insulating more than half of a wall's area, or more than a quarter of the building's whole external envelope, counts as renovating a thermal element, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's practical. Scotland and Northern Ireland have their own building standards processes.
Do you cover Didcot?
Yes — we survey and quote external wall insulation in Didcot (OX11) and nearby Abingdon, Oxford and Thatcham, with a fixed written price before any work starts.