Cover pebble dash · Oxfordshire
Covering pebble dash in Didcot
If you're planning pebble dash covering in Didcot, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Before quoting Didcot pebble dash jobs, we tap-test each elevation and mark any hollow areas.
- Free survey in OX11 and nearby
- Guide price from £72 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Didcot
Postcode, service and a phone number is all we need.
What the job covers
- Render-over uses a bonding coat and mesh to level the stones
- Loose areas are cut out and patched first
- Combining with insulation adds warmth as well as a new look
- Removing dash entirely is noisy and can damage soft brick
Before we quote in Didcot
As well as Didcot itself, we quote in Abingdon, Oxford and Thatcham. Didcot is about 10 miles from Oxford. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If your house in Didcot is pebble-dashed, covering the dash is usually simpler than removing it.
- Postcode district
- OX11
- County or area
- Oxfordshire
- Nation
- England
- Nearby
- Abingdon, Oxford, Thatcham, Newbury
Planning and building control in England
Before quoting in Didcot, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Can you render over pebble dash?
Yes, if it's well bonded. The surface is cleaned, any loose patches removed and repaired, then a levelling base coat with mesh goes over the stones before the finish. This is cheaper and less disruptive than removing the dash.
Covering pebble dash prices in Didcot
| Item | Guide price | Notes |
|---|---|---|
| Render over sound pebble dash | £72–£114 per m²inc VAT | Excluding scaffold |
| Insulate over pebble dash (EWI) | £110–£175 per m²0% VAT | |
| Pebble dash removal | £24–£48 per m²inc VAT | Where needed |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Cover pebble dash in Didcot: questions
Is it cheaper to cover pebble dash or remove it?
Covering is usually cheaper and less disruptive, as long as the dash is sound.
Does covering pebble dash need planning permission?
Changing the finish on a house usually doesn't in England and Wales outside conservation areas, but check if your house is in one or is listed.
Can I paint pebble dash instead?
You can, but it doesn't fix hollow areas or cracks, and paint on dash often needs redoing every few years.
Do you cover Didcot?
Yes — we survey and quote pebble dash covering in Didcot (OX11) and nearby Abingdon, Oxford and Thatcham, with a fixed written price before any work starts.