Free survey · Fixed written price · UK-wideCall free 0800 088 6248

External wall insulation · Scottish Borders

External wall insulation in Kelso

Looking for external wall insulation in Kelso? We survey homes across Kelso and the TD5 area, then give you a fixed written price before any work starts. Whole-house jobs and single elevations are both quoted in Kelso; a cold gable or rear wall can be done on its own where it suits.

  • Free survey in TD5 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Kelso

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
  • Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
  • Boards chosen for the wall: EPS, mineral wool, wood fibre or phenolic
  • Work happens outside, so you can live at home throughout
Side gable of a semi-detached house part-way through external wall insulation, with mineral wool slabs, mesh base coat and finished white render

What we look for in Kelso

We cover Kelso and nearby Galashiels, Hawick and Peebles. Kelso sits around 18 miles from Hawick. The Scottish Borders have stone-built towns and villages, rural cottages and some post-war estates.

Exposure to wind-driven rain varies across Scottish Borders: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

We plan EWI in Kelso around the details that cause trouble later — cills, eaves, downpipes and the base of the wall above the damp-proof course.

Postcode district
TD5
County or area
Scottish Borders
Nation
Scotland
Nearby
Galashiels, Hawick, Peebles, Musselburgh

Permissions in Scotland

Scottish householder rules mean many Kelso jobs that change the outside of a house need a planning application; we confirm the position before quoting.

Where a building warrant is needed for Kelso work, it's obtained before installation starts, and the quote says who arranges it.

What finish can I have?

Most EWI is finished in a thin-coat silicone render in a through-coloured shade, with a 1–2mm grain. Acrylic, mineral (painted), dry-dash and brick-slip finishes are also available. Where planning wants a brick look, brick slips over the insulation keep the street appearance.

External wall insulation prices in Kelso

External wall insulation guide prices
ItemGuide priceNotes
EPS system with silicone render£105–£145 per m²0% VATMost common choice for houses
Mineral wool system£125–£170 per m²0% VATNon-combustible, vapour-open
Brick-slip finish over insulation£185–£260 per m²0% VATWhere a brick look is wanted
Three-bed semi, EPS + silicone (incl. scaffold)£10,200–£17,7000% VAT80–100 m² of wall; depends on detailing and access

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

External wall insulation in Kelso: questions

How much does external wall insulation cost?

Our guide price for EWI is £105–£170 per m² of wall depending on the system, plus scaffolding. A typical three-bed semi with EPS and silicone render comes to roughly £10,200–£17,700 for the whole house, including scaffold. Installing insulation in a home is zero-rated for VAT until 31 March 2027, so that's the total. You get a fixed written price after a free survey.

How long does external wall insulation last?

A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.

Can EWI go over pebble dash?

Usually yes. The dash is tested for adhesion and hollow areas; sound dash can be insulated over with additional mechanical fixings, while loose areas are removed first.

Do you cover Kelso?

Yes — we survey and quote external wall insulation in Kelso (TD5) and nearby Galashiels, Hawick and Peebles, with a fixed written price before any work starts.

External wall insulation in Kelso

Book a free survey in Kelso — no obligation.

Call freeGet a quote