External wall insulation · Surrey
External wall insulation in Esher
External wall insulation in Esher: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. For homes in Esher, the survey starts with the wall itself: solid brick, stone or concrete, and whether any old render is sound enough to insulate over.
- Free survey in KT10 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Esher
Postcode, service and a phone number is all we need.
What the job covers
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Covers tired brick, pebble dash or failing render with a new finish
Local considerations in Esher
As well as Esher itself, we quote in Walton-on-Thames, Sunbury-on-Thames and Surbiton. Esher sits around 9 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Whole-house jobs and single elevations are both quoted in Esher; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- KT10
- County or area
- Surrey
- Nation
- England
- Nearby
- Walton-on-Thames, Sunbury-on-Thames, Surbiton, Hanworth
Planning and building control in England
Planning in Esher follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Which homes is EWI suited to?
EWI is mainly used on solid-walled houses (most homes built before about 1920), on post-war concrete and steel-framed houses, on homes where cavity fill isn't possible, and on bungalows and park homes. It also suits flats and blocks where the whole building is treated at once.
It is less straightforward where the walls face a pavement with no room to project, on listed buildings, or where planning rules want the existing brick or stone left visible. A survey picks these up before you commit.
External wall insulation prices in Esher
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
External wall insulation in Esher: questions
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
Do you cover Esher?
Yes — we survey and quote external wall insulation in Esher (KT10) and nearby Walton-on-Thames, Sunbury-on-Thames and Surbiton, with a fixed written price before any work starts.