Lime render · Surrey
Lime render in Esher
If you're planning lime render in Esher, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Lime work in Esher is scheduled for frost-free months so the render cures properly.
- Free survey in KT10 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Esher
Postcode, service and a phone number is all we need.
Included as standard
- Helps walls dry out where cement render trapped moisture
- Slower curing — needs frost-free, protected conditions
- Works with wood fibre insulation as a breathable EWI system
- Vapour-open and flexible, suited to older solid walls
Local considerations in Esher
Surveys in Esher also cover the surrounding KT10 district and towns such as Walton-on-Thames and Sunbury-on-Thames. It's roughly 9 miles from Esher to Woking, the largest town in Surrey. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For stone and early brick properties in Esher, lime render is often the right answer.
- Postcode district
- KT10
- County or area
- Surrey
- Nation
- England
- Nearby
- Walton-on-Thames, Sunbury-on-Thames, Surbiton, Hanworth
Permissions in England
Planning in Esher follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is lime render applied?
Old cement render is removed where it's causing problems, the wall is dampened, and lime is applied in successive coats — usually a scratch coat, a float coat and a finish coat — with curing time between. Freshly applied lime must be protected from frost, rain and fast drying.
Lime render prices in Esher
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Lime render in Esher: questions
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Do you cover Esher?
Yes — we survey and quote lime render in Esher (KT10) and nearby Walton-on-Thames, Sunbury-on-Thames and Surbiton, with a fixed written price before any work starts.