Silicone render · Surrey
Silicone render in Esher
If you're planning silicone render in Esher, start with a free survey: we measure, check the walls and confirm planning and building control for your address. If you're re-rendering in Esher, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in KT10 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Esher
Postcode, service and a phone number is all we need.
Part of every quote
- Can also go straight onto prepared masonry
- Through-coloured — no painting needed
- Vapour-open, so walls can still breathe
- Fine, even grain from about 1–2mm
What we look for in Esher
We cover Esher and nearby Walton-on-Thames, Sunbury-on-Thames and Surbiton. It's roughly 9 miles from Esher to Woking, the largest town in Surrey. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Esher, either on its own or over insulation.
- Postcode district
- KT10
- County or area
- Surrey
- Nation
- England
- Nearby
- Walton-on-Thames, Sunbury-on-Thames, Surbiton, Hanworth
Approvals in England
Before quoting in Esher, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Esher
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Esher: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Esher?
Yes — we survey and quote silicone render in Esher (KT10) and nearby Walton-on-Thames, Sunbury-on-Thames and Surbiton, with a fixed written price before any work starts.