External wall insulation · Wiltshire
External wall insulation in Trowbridge
Homeowners and landlords in Trowbridge can get a free survey and a fixed written quote for external wall insulation, covering BA14 and the surrounding area. For homes in Trowbridge, the survey starts with the wall itself: solid brick, stone or concrete, and whether any old render is sound enough to insulate over.
- Free survey in BA14 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Trowbridge
Postcode, service and a phone number is all we need.
Part of every quote
- Installing wall insulation in homes is currently zero-rated for VAT until 31 March 2027
- Covers tired brick, pebble dash or failing render with a new finish
- Typically takes a 225mm solid brick wall from around 2.1 W/m²K to about 0.30 W/m²K with 90–110mm of board
- Cills, pipes, vents, meter boxes and the roofline detailed as part of the job
Trowbridge: walls, weather and approvals
As well as Trowbridge itself, we quote in Bath, Frome and Chippenham. Trowbridge sits around 25 miles from Swindon. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Wiltshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Whole-house jobs and single elevations are both quoted in Trowbridge; a cold gable or rear wall can be done on its own where it suits.
- Postcode district
- BA14
- County or area
- Wiltshire
- Nation
- England
- Nearby
- Bath, Frome, Chippenham, Kingswood
Approvals in England
Planning in Trowbridge follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Which homes is EWI suited to?
EWI is mainly used on solid-walled houses (most homes built before about 1920), on post-war concrete and steel-framed houses, on homes where cavity fill isn't possible, and on bungalows and park homes. It also suits flats and blocks where the whole building is treated at once.
It is less straightforward where the walls face a pavement with no room to project, on listed buildings, or where planning rules want the existing brick or stone left visible. A survey picks these up before you commit.
External wall insulation prices in Trowbridge
| Item | Guide price | Notes |
|---|---|---|
| EPS system with silicone render | £105–£145 per m²0% VAT | Most common choice for houses |
| Mineral wool system | £125–£170 per m²0% VAT | Non-combustible, vapour-open |
| Brick-slip finish over insulation | £185–£260 per m²0% VAT | Where a brick look is wanted |
| Three-bed semi, EPS + silicone (incl. scaffold) | £10,200–£17,7000% VAT | 80–100 m² of wall; depends on detailing and access |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
External wall insulation in Trowbridge: questions
Does external wall insulation cause damp?
Not when it is specified and detailed properly. Problems usually come from poor detailing: no starter track above the damp-proof course, gaps at cills and penetrations, or a vapour-closed system on a wall that needs to breathe. The survey checks moisture, ground levels and the wall type before a system is chosen.
How long does external wall insulation last?
A well-installed render system is commonly expected to last 25–30 years or more, with occasional cleaning and inspection of sealants. The system manufacturer's documentation states the expected service life for the specific build-up.
Do I need planning permission for external wall insulation?
Often not for a house in England or Wales if the finish looks similar to the existing walls. You will usually need permission in a conservation area, on flats, on commercial buildings or where the appearance changes noticeably. Listed buildings need listed building consent. We check your address before quoting.
Do you cover Trowbridge?
Yes — we survey and quote external wall insulation in Trowbridge (BA14) and nearby Bath, Frome and Chippenham, with a fixed written price before any work starts.