Insulated render · West Glamorgan
Insulated render systems in Port Talbot
If you're planning insulated render in Port Talbot, start with a free survey: we measure, check the walls and confirm planning and building control for your address. For houses in Port Talbot with shallow eaves, the insulated render thickness is planned with the roofline in mind.
- Free survey in SA13 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Port Talbot
Postcode, service and a phone number is all we need.
Part of every quote
- Contrasting colours for bands, plinths and features
- Through-coloured finishes in hundreds of shades
- One system: board, adhesive, fixings, mesh, primer and render
- Suitable for houses, extensions and whole buildings
Before we quote in Port Talbot
We cover Port Talbot and nearby Briton Ferry, Neath and Maesteg. Port Talbot is about 7 miles from Swansea. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Parts of West Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
We bring finish samples to Port Talbot surveys so colours can be judged in daylight against your roof and windows.
- Postcode district
- SA13
- County or area
- West Glamorgan
- Nation
- Wales
- Nearby
- Briton Ferry, Neath, Maesteg, Swansea
Planning and building control in Wales
Householder rules in Wales are similar to England's: in Port Talbot, a similar-looking finish on a house is often permitted, but conservation areas, flats and listed buildings need permission or consent.
In Wales, insulating or re-rendering more than half of a wall's area is treated as renovating a thermal element under Approved Document L (Wales), so building control is involved before work starts.
What texture will it have?
Thin-coat renders come in grain sizes, typically 1–2mm. A 1.5mm grain is a common middle ground: fine enough to look smooth from the street, coarse enough to hide minor imperfections.
Insulated render systems prices in Port Talbot
| Item | Guide price | Notes |
|---|---|---|
| Insulated render (EPS + silicone) | £105–£145 per m²0% VAT | Excluding scaffold |
| Mineral wool insulated render | £125–£170 per m²0% VAT | |
| Contrasting colour features | +£8–£20 per m²0% VAT | Where used |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Insulated render in Port Talbot: questions
Can insulated render be applied in winter?
Only in suitable weather — typically above 5°C and rising, with no frost or rain during curing. Winter programmes allow for lost days.
Will my house look different?
Yes, if it was brick or pebble dash. If you want to keep a brick look, a brick-slip finish over the insulation is an option.
Does insulated render need painting?
Through-coloured silicone and acrylic renders don't need painting. Mineral renders are usually painted with a compatible masonry paint.
Do you cover Port Talbot?
Yes — we survey and quote insulated render in Port Talbot (SA13) and nearby Briton Ferry, Neath and Maesteg, with a fixed written price before any work starts.