Silicone render · West Glamorgan
Silicone render in Port Talbot
If you're planning silicone render in Port Talbot, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Silicone suits most rendering jobs in Port Talbot, either on its own or over insulation.
- Free survey in SA13 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Port Talbot
Postcode, service and a phone number is all we need.
What's included
- Used as the finish on most EWI systems
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
What we look for in Port Talbot
As well as Port Talbot itself, we quote in Briton Ferry, Neath and Maesteg. Port Talbot sits around 7 miles from Swansea. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Parts of West Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
On tree-shaded or north-facing walls in Port Talbot, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- SA13
- County or area
- West Glamorgan
- Nation
- Wales
- Nearby
- Briton Ferry, Neath, Maesteg, Swansea
Approvals in Wales
Householder rules in Wales are similar to England's: in Port Talbot, a similar-looking finish on a house is often permitted, but conservation areas, flats and listed buildings need permission or consent.
In Wales, insulating or re-rendering more than half of a wall's area is treated as renovating a thermal element under Approved Document L (Wales), so building control is involved before work starts.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Port Talbot
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Port Talbot: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Port Talbot?
Yes — we survey and quote silicone render in Port Talbot (SA13) and nearby Briton Ferry, Neath and Maesteg, with a fixed written price before any work starts.