Lime render · Essex
Lime render in Brentwood
We quote lime render for homes in Brentwood (CM14) and nearby Billericay and Hornchurch, with guide prices online and a free survey to fix the price. For stone and early brick properties in Brentwood, lime render is often the right answer.
- Free survey in CM14 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Brentwood
Postcode, service and a phone number is all we need.
Included as standard
- Often appropriate in conservation settings
- Works with wood fibre insulation as a breathable EWI system
- Vapour-open and flexible, suited to older solid walls
- Slower curing — needs frost-free, protected conditions
What we look for in Brentwood
As well as Brentwood itself, we quote in Billericay, Hornchurch and Romford. It's roughly 18 miles from Brentwood to Southend-on-Sea, the largest town in Essex. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Brentwood, we look for cement patching that may be trapping moisture before suggesting lime.
- Postcode district
- CM14
- County or area
- Essex
- Nation
- England
- Nearby
- Billericay, Hornchurch, Romford, Basildon
Permissions in England
Planning in Brentwood follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Can lime render be insulated?
Yes, using wood fibre boards or insulating lime plasters. These keep the wall breathable while reducing heat loss.
Lime render prices in Brentwood
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Lime render in Brentwood: questions
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Can lime render be applied in winter?
Only with protection and in frost-free conditions. Spring to early autumn is the usual season.
Do you cover Brentwood?
Yes — we survey and quote lime render in Brentwood (CM14) and nearby Billericay, Hornchurch and Romford, with a fixed written price before any work starts.