Mineral wool EWI · Scotland
Mineral wool external wall insulation in Ayrshire
Get guide prices online, then a free survey and fixed quote for mineral wool external wall insulation in Ayrshire, including Ayr and Irvine. For homes in Ayrshire near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Free survey and fixed written price
- Guide price from £125 per m² + scaffold, 0% VAT
- Planning and building control checked for Scotland
Free survey in Ayrshire
Tell us the postcode and what you need.
Part of every quote
- Vapour-open, so moisture in solid walls can dry outwards
- Better sound reduction than foam boards
- Finished in mineral or silicone render, or brick slip
- Heavier than EPS, so more fixings and careful handling
- Used on blocks of flats and buildings with storeys above 11m
Before we quote in Ayrshire
South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Ayrshire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Older solid-walled homes in Ayrshire can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Nation
- Scotland
- Region
- South West Scotland
- Towns covered
- Kilmarnock, Ayr, Irvine
- Guide price
- From £125 per m² + scaffold · 0% VAT
Approvals in Scotland
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.
Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.
Scotland restricts combustible external wall cladding on buildings with a storey more than 11 metres above ground, so taller buildings use non-combustible insulation systems.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Ayrshire
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Mineral wool EWI in Ayrshire: questions
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Do you cover all of Ayrshire?
Yes. We survey and quote mineral wool external wall insulation across Ayrshire, including Kilmarnock, Ayr, Irvine.
Do I need planning permission in Scotland?
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.