Mineral wool EWI · Scotland
Mineral wool external wall insulation in Argyll and Bute
Mineral wool external wall insulation across Argyll and Bute: measured survey, clear specification and a fixed written price before any work starts. Older solid-walled homes in Argyll and Bute can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey and fixed written price
- Guide price from £125 per m² + scaffold, 0% VAT
- Planning and building control checked for Scotland
Free survey in Argyll and Bute
Tell us the postcode and what you need.
Part of every quote
- Heavier than EPS, so more fixings and careful handling
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Finished in mineral or silicone render, or brick slip
- Vapour-open, so moisture in solid walls can dry outwards
- Used on blocks of flats and buildings with storeys above 11m
What we look for in Argyll and Bute
The Highlands and Islands have many exposed stone and harled homes, timber-framed houses and scattered rural properties.
Parts of Argyll and Bute fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Older solid-walled homes in Argyll and Bute can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Nation
- Scotland
- Region
- Highlands and Islands
- Towns covered
- Helensburgh, Dunoon, Oban, Campbeltown
- Guide price
- From £125 per m² + scaffold · 0% VAT
Planning and building control in Scotland
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.
Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.
Scotland restricts combustible external wall cladding on buildings with a storey more than 11 metres above ground, so taller buildings use non-combustible insulation systems.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Argyll and Bute
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Mineral wool EWI in Argyll and Bute: questions
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Do you cover all of Argyll and Bute?
Yes. We survey and quote mineral wool external wall insulation across Argyll and Bute, including Helensburgh, Dunoon, Oban, Campbeltown. Island and remote addresses are surveyed by arrangement.
Do I need planning permission in Scotland?
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.