Silicone render · Scotland
Silicone render in Argyll and Bute
Silicone render across Argyll and Bute: measured survey, clear specification and a fixed written price before any work starts. Silicone suits most rendering jobs in Argyll and Bute, either on its own or over insulation.
- Free survey and fixed written price
- Guide price from £66 per m² + scaffold, inc VAT
- Planning and building control checked for Scotland
Free survey in Argyll and Bute
Tell us the postcode and what you need.
What you get
- Vapour-open, so walls can still breathe
- Can also go straight onto prepared masonry
- Used as the finish on most EWI systems
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
Before we quote in Argyll and Bute
The Highlands and Islands have many exposed stone and harled homes, timber-framed houses and scattered rural properties.
Parts of Argyll and Bute fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
If you're re-rendering in Argyll and Bute, we'll show you what adding insulation under the silicone would cost at the same time.
- Nation
- Scotland
- Region
- Highlands and Islands
- Towns covered
- Helensburgh, Dunoon, Oban, Campbeltown
- Guide price
- From £66 per m² + scaffold · inc VAT
Permissions in Scotland
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.
Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Argyll and Bute
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Argyll and Bute: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover all of Argyll and Bute?
Yes. We survey and quote silicone render across Argyll and Bute, including Helensburgh, Dunoon, Oban, Campbeltown. Island and remote addresses are surveyed by arrangement.
Do I need planning permission in Scotland?
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.