Silicone render · Scotland
Silicone render in Ayrshire
Silicone render across Ayrshire: measured survey, clear specification and a fixed written price before any work starts. On tree-shaded or north-facing walls in Ayrshire, silicone's water repellence helps it stay cleaner for longer.
- Free survey and fixed written price
- Guide price from £66 per m² + scaffold, inc VAT
- Planning and building control checked for Scotland
Free survey in Ayrshire
Tell us the postcode and what you need.
What you get
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Can also go straight onto prepared masonry
Ayrshire: walls, weather and approvals
South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Ayrshire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
On tree-shaded or north-facing walls in Ayrshire, silicone's water repellence helps it stay cleaner for longer.
- Nation
- Scotland
- Region
- South West Scotland
- Towns covered
- Kilmarnock, Ayr, Irvine
- Guide price
- From £66 per m² + scaffold · inc VAT
Approvals in Scotland
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.
Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Ayrshire
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Ayrshire: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover all of Ayrshire?
Yes. We survey and quote silicone render across Ayrshire, including Kilmarnock, Ayr, Irvine.
Do I need planning permission in Scotland?
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.