Mineral wool EWI · Ayrshire
Mineral wool external wall insulation in Irvine
Looking for mineral wool external wall insulation in Irvine? We survey homes across Irvine and the KA12 area, then give you a fixed written price before any work starts. For homes in Irvine near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Free survey in KA12 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Irvine
Postcode, service and a phone number is all we need.
Included as standard
- Vapour-open, so moisture in solid walls can dry outwards
- Better sound reduction than foam boards
- Used on blocks of flats and buildings with storeys above 11m
- Heavier than EPS, so more fixings and careful handling
Irvine: walls, weather and approvals
Surveys in Irvine also cover the surrounding KA12 district and towns such as Kilmarnock and Ayr. Irvine is about 6 miles from Kilmarnock. South West Scotland has stone and harled houses, coastal towns and post-war council housing.
Parts of Ayrshire fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
On blocks and taller buildings in Irvine, mineral wool is the default because of the fire guidance for external walls.
- Postcode district
- KA12
- County or area
- Ayrshire
- Nation
- Scotland
- Nearby
- Kilmarnock, Ayr, Newton Mearns, Paisley
Planning and building control in Scotland
Scottish householder rules mean many Irvine jobs that change the outside of a house need a planning application; we confirm the position before quoting.
Where a building warrant is needed for Irvine work, it's obtained before installation starts, and the quote says who arranges it.
Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground, so taller buildings get non-combustible systems.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Irvine
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Irvine: questions
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Do you cover Irvine?
Yes — we survey and quote mineral wool external wall insulation in Irvine (KA12) and nearby Kilmarnock, Ayr and Newton Mearns, with a fixed written price before any work starts.