Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Greater London

Mineral wool external wall insulation in Fulham

Mineral wool external wall insulation in Fulham: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Older solid-walled homes in Fulham can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in SW6 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Fulham

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Better sound reduction than foam boards
  • Vapour-open, so moisture in solid walls can dry outwards
  • Used on blocks of flats and buildings with storeys above 11m
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Fulham: walls, weather and approvals

As well as Fulham itself, we quote in Chelsea, Putney and Battersea. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

For homes in Fulham near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
SW6
County or area
Greater London
Nation
England
Nearby
Chelsea, Putney, Battersea, Shepherds Bush

Permissions in England

Before quoting in Fulham, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Fulham

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Mineral wool EWI in Fulham: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Do you cover Fulham?

Yes — we survey and quote mineral wool external wall insulation in Fulham (SW6) and nearby Chelsea, Putney and Battersea, with a fixed written price before any work starts.

Mineral wool EWI in Fulham

Start with a guide price, then fix it with a free survey in Fulham.

Call freeGet a quote