Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Greater London

Mineral wool external wall insulation in Barnes

Homeowners and landlords in Barnes can get a free survey and a fixed written quote for mineral wool external wall insulation, covering SW13 and the surrounding area. On blocks and taller buildings in Barnes, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in SW13 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Barnes

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Heavier than EPS, so more fixings and careful handling
  • Better sound reduction than foam boards
  • Finished in mineral or silicone render, or brick slip
  • Vapour-open, so moisture in solid walls can dry outwards
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Local considerations in Barnes

We cover Barnes and nearby Chiswick, Putney and Fulham. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Older solid-walled homes in Barnes can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

Postcode district
SW13
County or area
Greater London
Nation
England
Nearby
Chiswick, Putney, Fulham, Shepherds Bush

Permissions in England

Planning in Barnes follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Barnes

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Barnes: questions

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Do you cover Barnes?

Yes — we survey and quote mineral wool external wall insulation in Barnes (SW13) and nearby Chiswick, Putney and Fulham, with a fixed written price before any work starts.

Mineral wool EWI in Barnes

Book a free survey in Barnes — no obligation.

Call freeGet a quote