Mineral wool EWI · Greater London
Mineral wool external wall insulation in Richmond
From Richmond to Isleworth, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Older solid-walled homes in Richmond can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey in TW9 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Richmond
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so moisture in solid walls can dry outwards
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Used on blocks of flats and buildings with storeys above 11m
- Finished in mineral or silicone render, or brick slip
Before we quote in Richmond
We cover Richmond and nearby Isleworth, Hounslow and Barnes. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For homes in Richmond near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Postcode district
- TW9
- County or area
- Greater London
- Nation
- England
- Nearby
- Isleworth, Hounslow, Barnes, Chiswick
Permissions in England
Planning in Richmond follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Is mineral wool required on my building?
For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.
Mineral wool external wall insulation prices in Richmond
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Mineral wool EWI in Richmond: questions
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Do you cover Richmond?
Yes — we survey and quote mineral wool external wall insulation in Richmond (TW9) and nearby Isleworth, Hounslow and Barnes, with a fixed written price before any work starts.