Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Greater London

Mineral wool external wall insulation in Welling

From Welling to Bexley, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Older solid-walled homes in Welling can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in DA16 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Welling

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Heavier than EPS, so more fixings and careful handling
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Better sound reduction than foam boards
  • Used on blocks of flats and buildings with storeys above 11m
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Before we quote in Welling

As well as Welling itself, we quote in Bexley, Eltham and Thamesmead. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

For homes in Welling near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
DA16
County or area
Greater London
Nation
England
Nearby
Bexley, Eltham, Thamesmead, Chislehurst

Permissions in England

Before quoting in Welling, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Welling

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Welling: questions

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Do you cover Welling?

Yes — we survey and quote mineral wool external wall insulation in Welling (DA16) and nearby Bexley, Eltham and Thamesmead, with a fixed written price before any work starts.

Mineral wool EWI in Welling

Get a free survey and fixed written price for mineral wool external wall insulation in Welling.

Call freeGet a quote