Mineral wool EWI · Greater Manchester
Mineral wool external wall insulation in Hyde
We quote mineral wool external wall insulation for homes in Hyde (SK14) and nearby Denton and Stalybridge, with guide prices online and a free survey to fix the price. Older solid-walled homes in Hyde can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Free survey in SK14 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Hyde
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so moisture in solid walls can dry outwards
- Finished in mineral or silicone render, or brick slip
- Heavier than EPS, so more fixings and careful handling
- Better sound reduction than foam boards
Local considerations in Hyde
We cover Hyde and nearby Denton, Stalybridge and Ashton-under-Lyne. Hyde is about 7 miles from Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On blocks and taller buildings in Hyde, mineral wool is the default because of the fire guidance for external walls.
- Postcode district
- SK14
- County or area
- Greater Manchester
- Nation
- England
- Nearby
- Denton, Stalybridge, Ashton-under-Lyne, Droylsden
Approvals in England
For a house in Hyde, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Hyde
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Hyde: questions
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Do you cover Hyde?
Yes — we survey and quote mineral wool external wall insulation in Hyde (SK14) and nearby Denton, Stalybridge and Ashton-under-Lyne, with a fixed written price before any work starts.