Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Hampshire

Mineral wool external wall insulation in Hythe

We quote mineral wool external wall insulation for homes in Hythe (SO45) and nearby Southampton and Totton, with guide prices online and a free survey to fix the price. For homes in Hythe near busy roads, mineral wool's sound reduction can be a reason to choose it.

  • Free survey in SO45 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Hythe

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Finished in mineral or silicone render, or brick slip
  • Heavier than EPS, so more fixings and careful handling
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Used on blocks of flats and buildings with storeys above 11m
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

What we look for in Hythe

Surveys in Hythe also cover the surrounding SO45 district and towns such as Southampton and Totton. It's roughly 3 miles from Hythe to Southampton, the largest town in Hampshire. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

On blocks and taller buildings in Hythe, mineral wool is the default because of the fire guidance for external walls.

Postcode district
SO45
County or area
Hampshire
Nation
England
Nearby
Southampton, Totton, Eastleigh, Cowes

Planning and building control in England

Planning in Hythe follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

What about noise?

Dense mineral wool adds mass and absorbs sound, so homes beside main roads or railways often notice a quieter interior, particularly where windows are also upgraded. The improvement depends on the whole wall and windows, so we don't quote decibel figures without testing.

Mineral wool external wall insulation prices in Hythe

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Hythe: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Hythe?

Yes — we survey and quote mineral wool external wall insulation in Hythe (SO45) and nearby Southampton, Totton and Eastleigh, with a fixed written price before any work starts.

Mineral wool EWI in Hythe

Send your postcode and we'll arrange a survey in Hythe.

Call freeGet a quote