Mineral wool EWI · Hampshire
Mineral wool external wall insulation in Totton
Mineral wool external wall insulation in Totton: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. For homes in Totton near busy roads, mineral wool's sound reduction can be a reason to choose it.
- Free survey in SO40 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Totton
Postcode, service and a phone number is all we need.
What you get
- Vapour-open, so moisture in solid walls can dry outwards
- Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
- Finished in mineral or silicone render, or brick slip
- Better sound reduction than foam boards
What we look for in Totton
We also cover Southampton and Hythe, close to Totton. It's roughly 4 miles from Totton to Southampton, the largest town in Hampshire. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On blocks and taller buildings in Totton, mineral wool is the default because of the fire guidance for external walls.
- Postcode district
- SO40
- County or area
- Hampshire
- Nation
- England
- Nearby
- Southampton, Hythe, Eastleigh, Winchester
England: planning and regulations
For a house in Totton, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Totton
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Mineral wool EWI in Totton: questions
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Is mineral wool needed for a bungalow?
Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Do you cover Totton?
Yes — we survey and quote mineral wool external wall insulation in Totton (SO40) and nearby Southampton, Hythe and Eastleigh, with a fixed written price before any work starts.