Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Kent

Mineral wool external wall insulation in Maidstone

We quote mineral wool external wall insulation for homes in Maidstone (ME14) and nearby Chatham and Rochester, with guide prices online and a free survey to fix the price. Older solid-walled homes in Maidstone can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in ME14 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Maidstone

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Heavier than EPS, so more fixings and careful handling
  • Finished in mineral or silicone render, or brick slip
  • Better sound reduction than foam boards
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Homes and walls in Maidstone

Surveys in Maidstone also cover the surrounding ME14 district and towns such as Chatham and Rochester. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

For homes in Maidstone near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
ME14
County or area
Kent
Nation
England
Nearby
Chatham, Rochester, Gillingham, Strood

Approvals in England

Planning in Maidstone follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Maidstone

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Mineral wool EWI in Maidstone: questions

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Maidstone?

Yes — we survey and quote mineral wool external wall insulation in Maidstone (ME14) and nearby Chatham, Rochester and Gillingham, with a fixed written price before any work starts.

Mineral wool EWI in Maidstone

Send your postcode and we'll arrange a survey in Maidstone.

Call freeGet a quote