Mineral wool EWI · Oxfordshire
Mineral wool external wall insulation in Abingdon
We quote mineral wool external wall insulation for homes in Abingdon (OX14) and nearby Didcot and Oxford, with guide prices online and a free survey to fix the price. On blocks and taller buildings in Abingdon, mineral wool is the default because of the fire guidance for external walls.
- Free survey in OX14 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Abingdon
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so moisture in solid walls can dry outwards
- Used on blocks of flats and buildings with storeys above 11m
- Heavier than EPS, so more fixings and careful handling
- Finished in mineral or silicone render, or brick slip
Homes and walls in Abingdon
As well as Abingdon itself, we quote in Didcot, Oxford and Witney. Abingdon sits around 6 miles from Oxford. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Older solid-walled homes in Abingdon can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Postcode district
- OX14
- County or area
- Oxfordshire
- Nation
- England
- Nearby
- Didcot, Oxford, Witney, Bicester
England: planning and regulations
Before quoting in Abingdon, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Is mineral wool required on my building?
For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.
Mineral wool external wall insulation prices in Abingdon
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Mineral wool EWI in Abingdon: questions
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Do you cover Abingdon?
Yes — we survey and quote mineral wool external wall insulation in Abingdon (OX14) and nearby Didcot, Oxford and Witney, with a fixed written price before any work starts.