Mineral wool EWI · Oxfordshire
Mineral wool external wall insulation in Didcot
If you're planning mineral wool external wall insulation in Didcot, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On blocks and taller buildings in Didcot, mineral wool is the default because of the fire guidance for external walls.
- Free survey in OX11 and nearby
- Guide price from £125 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Didcot
Postcode, service and a phone number is all we need.
What the job covers
- Used on blocks of flats and buildings with storeys above 11m
- Heavier than EPS, so more fixings and careful handling
- Finished in mineral or silicone render, or brick slip
- Vapour-open, so moisture in solid walls can dry outwards
What we look for in Didcot
We cover Didcot and nearby Abingdon, Oxford and Thatcham. Didcot sits around 10 miles from Oxford. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Older solid-walled homes in Didcot can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.
- Postcode district
- OX11
- County or area
- Oxfordshire
- Nation
- England
- Nearby
- Abingdon, Oxford, Thatcham, Newbury
Permissions in England
Planning in Didcot follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.
Why choose mineral wool over EPS?
Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.
The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.
Mineral wool external wall insulation prices in Didcot
| Item | Guide price | Notes |
|---|---|---|
| Mineral wool + mineral or silicone render | £125–£170 per m²0% VAT | Excluding scaffold |
| Mineral wool + brick slip | £195–£260 per m²0% VAT | Heavier slip systems need extra fixings |
| Three-bed semi, full house | £11,800–£20,2000% VAT | 80–100 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Mineral wool EWI in Didcot: questions
Can mineral wool EWI have a brick finish?
Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.
Does mineral wool get wet?
It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.
Is mineral wool better than EPS?
Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.
Do you cover Didcot?
Yes — we survey and quote mineral wool external wall insulation in Didcot (OX11) and nearby Abingdon, Oxford and Thatcham, with a fixed written price before any work starts.