Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Somerset

Mineral wool external wall insulation in Frome

We quote mineral wool external wall insulation for homes in Frome (BA11) and nearby Trowbridge and Bath, with guide prices online and a free survey to fix the price. For homes in Frome near busy roads, mineral wool's sound reduction can be a reason to choose it.

  • Free survey in BA11 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Frome

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Vapour-open, so moisture in solid walls can dry outwards
  • Better sound reduction than foam boards
  • Heavier than EPS, so more fixings and careful handling
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

What we look for in Frome

We also cover Trowbridge and Bath, close to Frome. It's roughly 10 miles from Frome to Bath, the largest town in Somerset. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

On blocks and taller buildings in Frome, mineral wool is the default because of the fire guidance for external walls.

Postcode district
BA11
County or area
Somerset
Nation
England
Nearby
Trowbridge, Bath, Kingswood, Chippenham

Approvals in England

Before quoting in Frome, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

What about noise?

Dense mineral wool adds mass and absorbs sound, so homes beside main roads or railways often notice a quieter interior, particularly where windows are also upgraded. The improvement depends on the whole wall and windows, so we don't quote decibel figures without testing.

Mineral wool external wall insulation prices in Frome

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Frome: questions

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Do you cover Frome?

Yes — we survey and quote mineral wool external wall insulation in Frome (BA11) and nearby Trowbridge, Bath and Kingswood, with a fixed written price before any work starts.

Mineral wool EWI in Frome

Send your postcode and we'll arrange a survey in Frome.

Call freeGet a quote