Non-traditional houses · Dundee and Angus
Non-traditional and concrete house insulation in Montrose
Non-traditional and concrete house insulation in Montrose: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. For concrete houses in Montrose, we report any visible spalling or cracking before quoting the insulation, not after.
- Free survey in DD10 and nearby
- Guide price from £120 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Montrose
Postcode, service and a phone number is all we need.
Included as standard
- Steel-framed BISF houses need care around the upper-storey cladding
- Fixing design depends on the panel or frame behind the wall
- Most system-built homes have thin, cold walls and no fillable cavity
- EWI improves comfort and can renew a tired concrete exterior
Homes and walls in Montrose
As well as Montrose itself, we quote in Arbroath, Forfar and Dundee. Montrose is about 25 miles from Dundee. Tayside has stone tenements and terraces in the towns, harled cottages and post-war estates.
Exposure to wind-driven rain varies across Dundee and Angus: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where a home in Montrose is system-built, the first job is confirming the construction type.
- Postcode district
- DD10
- County or area
- Dundee and Angus
- Nation
- Scotland
- Nearby
- Arbroath, Forfar, Dundee, Aberdeen
Approvals in Scotland
Scottish householder rules mean many Montrose jobs that change the outside of a house need a planning application; we confirm the position before quoting.
Where a building warrant is needed for Montrose work, it's obtained before installation starts, and the quote says who arranges it.
What does the work involve?
After checking the wall condition, any spalling concrete or corroded steel is reported before boards go on. Fixings are chosen for the substrate — concrete, steel-framed panels or mixed constructions — and the system is detailed around eaves, cills and the junction with neighbouring properties, which may not be insulated.
Non-traditional and concrete house insulation prices in Montrose
| Item | Guide price | Notes |
|---|---|---|
| EWI on concrete or steel-framed walls | £120–£180 per m²0% VAT | Includes extra preparation |
| Semi-detached, full house | £11,400–£21,2000% VAT | 80–100 m² of wall, including scaffold |
| Concrete repairs found at survey | Priced separately | Only where needed |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Non-traditional houses in Montrose: questions
Can you insulate a Wimpey no-fines house?
Yes. No-fines houses have solid poured-concrete walls with no cavity, so EWI is the usual route. The survey checks the concrete condition first.
Can you put EWI on a BISF house?
Yes, with care. The steel frame and upper-storey cladding need a system and fixing method designed for that construction, and the condition of the frame should be understood first.
Will EWI make my house mortgageable?
It can make a house more attractive and better insulated, but it does not replace a certified structural repair where a lender requires one. Ask your lender before relying on it.
Do you cover Montrose?
Yes — we survey and quote non-traditional house insulation in Montrose (DD10) and nearby Arbroath, Forfar and Dundee, with a fixed written price before any work starts.