Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Non-traditional houses · Wiltshire

Non-traditional and concrete house insulation in Salisbury

Homeowners and landlords in Salisbury can get a free survey and a fixed written quote for non-traditional house insulation, covering SP1 and the surrounding area. Where a home in Salisbury is system-built, the first job is confirming the construction type.

  • Free survey in SP1 and nearby
  • Guide price from £120 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Salisbury

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Steel-framed BISF houses need care around the upper-storey cladding
  • Fixing design depends on the panel or frame behind the wall
  • The survey identifies the construction type before anything is specified
  • EWI is not a structural repair for PRC houses designated defective
A pair of post-war concrete semi-detached houses newly rendered in white and grey beside neighbours still showing concrete panels

Homes and walls in Salisbury

As well as Salisbury itself, we quote in Andover, Totton and Southampton. It's roughly 34 miles from Salisbury to Swindon, the largest town in Wiltshire. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Exposure to wind-driven rain varies across Wiltshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For concrete houses in Salisbury, we report any visible spalling or cracking before quoting the insulation, not after.

Postcode district
SP1
County or area
Wiltshire
Nation
England
Nearby
Andover, Totton, Southampton, Eastleigh

Permissions in England

For a house in Salisbury, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

What does the work involve?

After checking the wall condition, any spalling concrete or corroded steel is reported before boards go on. Fixings are chosen for the substrate — concrete, steel-framed panels or mixed constructions — and the system is detailed around eaves, cills and the junction with neighbouring properties, which may not be insulated.

Non-traditional and concrete house insulation prices in Salisbury

Non-traditional and concrete house insulation guide prices
ItemGuide priceNotes
EWI on concrete or steel-framed walls£120–£180 per m²0% VATIncludes extra preparation
Semi-detached, full house£11,400–£21,2000% VAT80–100 m² of wall, including scaffold
Concrete repairs found at surveyPriced separatelyOnly where needed

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Non-traditional houses in Salisbury: questions

Can you insulate a Wimpey no-fines house?

Yes. No-fines houses have solid poured-concrete walls with no cavity, so EWI is the usual route. The survey checks the concrete condition first.

What if my neighbour isn't insulating?

We finish the system neatly at the boundary with a closing detail so the neighbouring house isn't affected and can be joined later.

Can you put EWI on a BISF house?

Yes, with care. The steel frame and upper-storey cladding need a system and fixing method designed for that construction, and the condition of the frame should be understood first.

Do you cover Salisbury?

Yes — we survey and quote non-traditional house insulation in Salisbury (SP1) and nearby Andover, Totton and Southampton, with a fixed written price before any work starts.

Non-traditional houses in Salisbury

Book a free survey in Salisbury — no obligation.

Call freeGet a quote