Cover pebble dash · Essex
Covering pebble dash in Basildon
From Basildon to Pitsea, we price pebble dash covering after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Before quoting Basildon pebble dash jobs, we tap-test each elevation and mark any hollow areas.
- Free survey in SS14 and nearby
- Guide price from £72 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Basildon
Postcode, service and a phone number is all we need.
What's included
- Loose areas are cut out and patched first
- Combining with insulation adds warmth as well as a new look
- Render-over uses a bonding coat and mesh to level the stones
- Removing dash entirely is noisy and can damage soft brick
What we look for in Basildon
We also cover Pitsea and Stanford-le-Hope, close to Basildon. Basildon is about 11 miles from Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're covering pebble dash in Basildon, we price both a render-over and an insulate-over option.
- Postcode district
- SS14
- County or area
- Essex
- Nation
- England
- Nearby
- Pitsea, Stanford-le-Hope, Wickford, Billericay
Planning and building control in England
Planning in Basildon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Can you render over pebble dash?
Yes, if it's well bonded. The surface is cleaned, any loose patches removed and repaired, then a levelling base coat with mesh goes over the stones before the finish. This is cheaper and less disruptive than removing the dash.
Covering pebble dash prices in Basildon
| Item | Guide price | Notes |
|---|---|---|
| Render over sound pebble dash | £72–£114 per m²inc VAT | Excluding scaffold |
| Insulate over pebble dash (EWI) | £110–£175 per m²0% VAT | |
| Pebble dash removal | £24–£48 per m²inc VAT | Where needed |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Cover pebble dash in Basildon: questions
Will the stones show through?
No. A levelling base coat with mesh fills over the stones before the finish goes on.
Can I paint pebble dash instead?
You can, but it doesn't fix hollow areas or cracks, and paint on dash often needs redoing every few years.
Does covering pebble dash need planning permission?
Changing the finish on a house usually doesn't in England and Wales outside conservation areas, but check if your house is in one or is listed.
Do you cover Basildon?
Yes — we survey and quote pebble dash covering in Basildon (SS14) and nearby Pitsea, Stanford-le-Hope and Wickford, with a fixed written price before any work starts.