Cover pebble dash · England
Covering pebble dash in Kent
Quotes for pebble dash covering in Kent set out the system, detailing, access and VAT position in writing. If your house in Kent is pebble-dashed, covering the dash is usually simpler than removing it.
- Free survey and fixed written price
- Guide price from £72 per m² + scaffold, inc VAT
- Planning and building control checked for England
Free survey in Kent
Tell us the postcode and what you need.
Included as standard
- Removing dash entirely is noisy and can damage soft brick
- Loose areas are cut out and patched first
- Render-over uses a bonding coat and mesh to level the stones
- Sound dash can be insulated over with extra mechanical fixings
- Combining with insulation adds warmth as well as a new look
Homes and walls in Kent
Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Before quoting Kent pebble dash jobs, we tap-test each elevation and mark any hollow areas.
- Nation
- England
- Region
- South East
- Towns covered
- Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone, Ashford (Kent), Margate, Dartford…
- Guide price
- From £72 per m² + scaffold · inc VAT
Permissions in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
Can you render over pebble dash?
Yes, if it's well bonded. The surface is cleaned, any loose patches removed and repaired, then a levelling base coat with mesh goes over the stones before the finish. This is cheaper and less disruptive than removing the dash.
Covering pebble dash prices in Kent
| Item | Guide price | Notes |
|---|---|---|
| Render over sound pebble dash | £72–£114 per m²inc VAT | Excluding scaffold |
| Insulate over pebble dash (EWI) | £110–£175 per m²0% VAT | |
| Pebble dash removal | £24–£48 per m²inc VAT | Where needed |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Cover pebble dash in Kent: questions
Will the stones show through?
No. A levelling base coat with mesh fills over the stones before the finish goes on.
Is it cheaper to cover pebble dash or remove it?
Covering is usually cheaper and less disruptive, as long as the dash is sound.
Does covering pebble dash need planning permission?
Changing the finish on a house usually doesn't in England and Wales outside conservation areas, but check if your house is in one or is listed.
Do you cover all of Kent?
Yes. We survey and quote pebble dash covering across Kent, including Maidstone, Gillingham, Chatham, Tunbridge Wells, Folkestone.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.