Cover pebble dash · South Glamorgan
Covering pebble dash in Barry
If you're planning pebble dash covering in Barry, start with a free survey: we measure, check the walls and confirm planning and building control for your address. If your house in Barry is pebble-dashed, covering the dash is usually simpler than removing it.
- Free survey in CF63 and nearby
- Guide price from £72 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Barry
Postcode, service and a phone number is all we need.
What you get
- Tap-testing finds hollow, loose areas before anything is decided
- Render-over uses a bonding coat and mesh to level the stones
- Sound dash can be insulated over with extra mechanical fixings
- Removing dash entirely is noisy and can damage soft brick
Barry: walls, weather and approvals
Surveys in Barry also cover the surrounding CF63 district and towns such as Penarth and Cardiff. Barry sits around 7 miles from Cardiff. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Exposure to wind-driven rain varies across South Glamorgan: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Before quoting Barry pebble dash jobs, we tap-test each elevation and mark any hollow areas.
- Postcode district
- CF63
- County or area
- South Glamorgan
- Nation
- Wales
- Nearby
- Penarth, Cardiff, Caerphilly, Pontypridd
Planning and building control in Wales
Householder rules in Wales are similar to England's: in Barry, a similar-looking finish on a house is often permitted, but conservation areas, flats and listed buildings need permission or consent.
In Wales, insulating or re-rendering more than half of a wall's area is treated as renovating a thermal element under Approved Document L (Wales), so building control is involved before work starts.
When does pebble dash need removing?
Where it's widely hollow, cracked or letting water in, or where the wall underneath needs to be inspected or repaired. Removal is dusty and noisy and can damage the face of soft bricks, so it's not the default.
Covering pebble dash prices in Barry
| Item | Guide price | Notes |
|---|---|---|
| Render over sound pebble dash | £72–£114 per m²inc VAT | Excluding scaffold |
| Insulate over pebble dash (EWI) | £110–£175 per m²0% VAT | |
| Pebble dash removal | £24–£48 per m²inc VAT | Where needed |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Cover pebble dash in Barry: questions
Does covering pebble dash need planning permission?
Changing the finish on a house usually doesn't in England and Wales outside conservation areas, but check if your house is in one or is listed.
Will the stones show through?
No. A levelling base coat with mesh fills over the stones before the finish goes on.
Is it cheaper to cover pebble dash or remove it?
Covering is usually cheaper and less disruptive, as long as the dash is sound.
Do you cover Barry?
Yes — we survey and quote pebble dash covering in Barry (CF63) and nearby Penarth, Cardiff and Caerphilly, with a fixed written price before any work starts.