Cover pebble dash · Tyne and Wear
Covering pebble dash in South Shields
If you're planning pebble dash covering in South Shields, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Before quoting South Shields pebble dash jobs, we tap-test each elevation and mark any hollow areas.
- Free survey in NE33 and nearby
- Guide price from £72 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in South Shields
Postcode, service and a phone number is all we need.
Part of every quote
- Tap-testing finds hollow, loose areas before anything is decided
- Removing dash entirely is noisy and can damage soft brick
- Loose areas are cut out and patched first
- Render-over uses a bonding coat and mesh to level the stones

What we look for in South Shields
We cover South Shields and nearby North Shields, Jarrow and Whitley Bay. It's roughly 7 miles from South Shields to Newcastle upon Tyne, the largest town in Tyne and Wear. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If you're covering pebble dash in South Shields, we price both a render-over and an insulate-over option.
- Postcode district
- NE33
- County or area
- Tyne and Wear
- Nation
- England
- Nearby
- North Shields, Jarrow, Whitley Bay, Wallsend
England: planning and regulations
Planning in South Shields follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
When does pebble dash need removing?
Where it's widely hollow, cracked or letting water in, or where the wall underneath needs to be inspected or repaired. Removal is dusty and noisy and can damage the face of soft bricks, so it's not the default.
Covering pebble dash prices in South Shields
| Item | Guide price | Notes |
|---|---|---|
| Render over sound pebble dash | £72–£114 per m²inc VAT | Excluding scaffold |
| Insulate over pebble dash (EWI) | £110–£175 per m²0% VAT | |
| Pebble dash removal | £24–£48 per m²inc VAT | Where needed |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Cover pebble dash in South Shields: questions
Is it cheaper to cover pebble dash or remove it?
Covering is usually cheaper and less disruptive, as long as the dash is sound.
Will the stones show through?
No. A levelling base coat with mesh fills over the stones before the finish goes on.
Does covering pebble dash need planning permission?
Changing the finish on a house usually doesn't in England and Wales outside conservation areas, but check if your house is in one or is listed.
Do you cover South Shields?
Yes — we survey and quote pebble dash covering in South Shields (NE33) and nearby North Shields, Jarrow and Whitley Bay, with a fixed written price before any work starts.