Re-rendering · Hampshire
Re-rendering in Winchester
Quotes for re-rendering in Winchester list the system, the detailing and the VAT position in writing, so you know exactly what's included. For Winchester re-render jobs, we check whether building control needs notifying for your wall area.
- Free survey in SO23 and nearby
- Guide price from £90 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Winchester
Postcode, service and a phone number is all we need.
What you get
- Beads, cills and drips renewed so water is shed properly
- Option to add insulation at the same time
- In England and Wales, Building Regulations apply when more than half of a wall is re-rendered
- Choice of silicone, mineral, lime or monocouche finish
Winchester: walls, weather and approvals
We also cover Eastleigh and Southampton, close to Winchester. It's roughly 12 miles from Winchester to Southampton, the largest town in Hampshire. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
When Winchester homeowners ask for re-rendering, we price an insulated option alongside so the choice is clear.
- Postcode district
- SO23
- County or area
- Hampshire
- Nation
- England
- Nearby
- Eastleigh, Southampton, Totton, Andover
Approvals in England
Planning in Winchester follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Which new render should I choose?
On older solid walls, breathable lime or a mineral system is often safest. On sound modern masonry, silicone over a mesh base coat gives a durable, low-maintenance finish. If insulation is added, the finish is the one specified for the EWI system.
Re-rendering prices in Winchester
| Item | Guide price | Notes |
|---|---|---|
| Strip and re-render (silicone system) | £90–£150 per m²inc VAT | Excluding scaffold |
| Strip and insulate (EWI) | £125–£195 per m²0% VAT | Including removal |
| Waste and skip | Included |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Re-rendering in Winchester: questions
Is it worth adding insulation?
On solid or concrete walls it's usually the most cost-effective time to do it, because access and preparation are already paid for.
Do I need building control for re-rendering?
In England and Wales, re-rendering more than half of a wall's area — or more than a quarter of the whole building's envelope — is controlled work under Part L, so usually yes. We explain how it's handled in the quote.
Can I re-render just one wall?
Yes, though matching colour and texture to the other walls may mean recoating them too.
Do you cover Winchester?
Yes — we survey and quote re-rendering in Winchester (SO23) and nearby Eastleigh, Southampton and Totton, with a fixed written price before any work starts.