Re-rendering · Kent
Re-rendering in Folkestone
If you're planning re-rendering in Folkestone, start with a free survey: we measure, check the walls and confirm planning and building control for your address. When Folkestone homeowners ask for re-rendering, we price an insulated option alongside so the choice is clear.
- Free survey in CT19 and nearby
- Guide price from £90 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Folkestone
Postcode, service and a phone number is all we need.
What the job covers
- Beads, cills and drips renewed so water is shed properly
- In England and Wales, Building Regulations apply when more than half of a wall is re-rendered
- Old render hacked off and removed from site
- Choice of silicone, mineral, lime or monocouche finish
Before we quote in Folkestone
We cover Folkestone and nearby Dover, Ashford (Kent) and Deal. Folkestone sits around 31 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On older houses in Folkestone, stripping old render often reveals mortar repairs that are best done before re-rendering.
- Postcode district
- CT19
- County or area
- Kent
- Nation
- England
- Nearby
- Dover, Ashford (Kent), Deal, Canterbury
Permissions in England
Planning in Folkestone follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What's involved in stripping old render?
The render is hacked off, usually with breakers, and the debris bagged or skipped. The wall is then inspected: loose bricks, eroded mortar and damp spots are repaired, and the surface is prepared to suit the new system.
Re-rendering prices in Folkestone
| Item | Guide price | Notes |
|---|---|---|
| Strip and re-render (silicone system) | £90–£150 per m²inc VAT | Excluding scaffold |
| Strip and insulate (EWI) | £125–£195 per m²0% VAT | Including removal |
| Waste and skip | Included |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Re-rendering in Folkestone: questions
Is it worth adding insulation?
On solid or concrete walls it's usually the most cost-effective time to do it, because access and preparation are already paid for.
How do I know if my render has failed?
Signs include cracks, hollow sound when tapped, bulging, pieces falling off, and damp patches inside behind cracked areas.
Do I need building control for re-rendering?
In England and Wales, re-rendering more than half of a wall's area — or more than a quarter of the whole building's envelope — is controlled work under Part L, so usually yes. We explain how it's handled in the quote.
Do you cover Folkestone?
Yes — we survey and quote re-rendering in Folkestone (CT19) and nearby Dover, Ashford (Kent) and Deal, with a fixed written price before any work starts.