Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Silicone render · England

Silicone render in Devon

Quotes for silicone render in Devon set out the system, detailing, access and VAT position in writing. If you're re-rendering in Devon, we'll show you what adding insulation under the silicone would cost at the same time.

  • Free survey and fixed written price
  • Guide price from £66 per m² + scaffold, inc VAT
  • Planning and building control checked for England

Free survey in Devon

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Included as standard

  • Fine, even grain from about 1–2mm
  • Water-repellent surface that dries quickly after rain
  • Used as the finish on most EWI systems
  • Can also go straight onto prepared masonry
  • Through-coloured — no painting needed
A gloved hand finishing off-white textured silicone render with a steel trowel

Before we quote in Devon

The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Parts of Devon fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

Silicone suits most rendering jobs in Devon, either on its own or over insulation.

Nation
England
Region
South West
Towns covered
Plymouth, Exeter, Torquay, Paignton, Newton Abbot, Exmouth, Barnstaple, Bideford…
Guide price
From £66 per m² + scaffold · inc VAT

Planning and building control in England

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

Silicone or monocouche?

Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.

Silicone render prices in Devon

Silicone render guide prices
ItemGuide priceNotes
Silicone render on masonry (with base coat + mesh)£66–£102 per m²inc VATExcluding scaffold
Front and side of a semi (≈60 m²)£3,960–£6,120inc VATPlus scaffold
As the finish on EWIIncluded in EWI rates

Confirmed by a fixed written quote after survey. Prices include VAT at 20%.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Silicone render in Devon: questions

Can I paint silicone render later?

Yes, with a compatible silicone paint, though through-coloured render rarely needs it.

Does silicone render crack?

The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.

How long does silicone render take to dry?

It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.

Do you cover all of Devon?

Yes. We survey and quote silicone render across Devon, including Plymouth, Exeter, Torquay, Paignton, Newton Abbot.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Silicone render in Devon

Send your postcode and we'll arrange a survey in Devon.

Call freeGet a quote