Silicone render · England
Silicone render in Somerset
Planning silicone render anywhere in Somerset? We cover towns including Bath and Weston-super-Mare, and check planning and building control for each address. On tree-shaded or north-facing walls in Somerset, silicone's water repellence helps it stay cleaner for longer.
- Free survey and fixed written price
- Guide price from £66 per m² + scaffold, inc VAT
- Planning and building control checked for England
Free survey in Somerset
Tell us the postcode and what you need.
What the job covers
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Water-repellent surface that dries quickly after rain
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
Local considerations in Somerset
The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Somerset, either on its own or over insulation.
- Nation
- England
- Region
- South West
- Towns covered
- Bath, Weston-super-Mare, Taunton, Yeovil, Bridgwater, Frome, Portishead, Burnham-on-Sea…
- Guide price
- From £66 per m² + scaffold · inc VAT
England: planning and regulations
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Somerset
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Somerset: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover all of Somerset?
Yes. We survey and quote silicone render across Somerset, including Bath, Weston-super-Mare, Taunton, Yeovil, Bridgwater.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.