Silicone render · Dyfed
Silicone render in Ammanford
If you're planning silicone render in Ammanford, start with a free survey: we measure, check the walls and confirm planning and building control for your address. If you're re-rendering in Ammanford, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in SA18 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Ammanford
Postcode, service and a phone number is all we need.
What the job covers
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Water-repellent surface that dries quickly after rain
Homes and walls in Ammanford
Surveys in Ammanford also cover the surrounding SA18 district and towns such as Gorseinon and Llanelli. Ammanford is about 11 miles from Llanelli. West Wales has a high share of older solid-walled and stone homes, many in exposed coastal or rural settings.
Parts of Dyfed fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
Silicone suits most rendering jobs in Ammanford, either on its own or over insulation.
- Postcode district
- SA18
- County or area
- Dyfed
- Nation
- Wales
- Nearby
- Gorseinon, Llanelli, Neath, Swansea
Approvals in Wales
Householder rules in Wales are similar to England's: in Ammanford, a similar-looking finish on a house is often permitted, but conservation areas, flats and listed buildings need permission or consent.
Building control in Wales applies to most insulation and re-rendering jobs of this size; the quote states who submits the notice.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Ammanford
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Ammanford: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Ammanford?
Yes — we survey and quote silicone render in Ammanford (SA18) and nearby Gorseinon, Llanelli and Neath, with a fixed written price before any work starts.