Silicone render · Essex
Silicone render in Rayleigh
From Rayleigh to South Benfleet, we price silicone render after a measured survey — no guesswork, and no work starts until the price is agreed in writing. If you're re-rendering in Rayleigh, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in SS6 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Rayleigh
Postcode, service and a phone number is all we need.
Included as standard
- Vapour-open, so walls can still breathe
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
Before we quote in Rayleigh
We also cover South Benfleet and Wickford, close to Rayleigh. Rayleigh sits around 6 miles from Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Rayleigh, either on its own or over insulation.
- Postcode district
- SS6
- County or area
- Essex
- Nation
- England
- Nearby
- South Benfleet, Wickford, Pitsea, Canvey Island
Approvals in England
Before quoting in Rayleigh, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Rayleigh
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Rayleigh: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Rayleigh?
Yes — we survey and quote silicone render in Rayleigh (SS6) and nearby South Benfleet, Wickford and Pitsea, with a fixed written price before any work starts.