Silicone render · Essex
Silicone render in Southend-on-Sea
If you're planning silicone render in Southend-on-Sea, start with a free survey: we measure, check the walls and confirm planning and building control for your address. If you're re-rendering in Southend-on-Sea, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in SS1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Southend-on-Sea
Postcode, service and a phone number is all we need.
Included as standard
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
- Through-coloured — no painting needed
What we look for in Southend-on-Sea
We also cover Rayleigh and Canvey Island, close to Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Southend-on-Sea, either on its own or over insulation.
- Postcode district
- SS1
- County or area
- Essex
- Nation
- England
- Nearby
- Rayleigh, Canvey Island, South Benfleet, Pitsea
England: planning and regulations
Before quoting in Southend-on-Sea, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Southend-on-Sea
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Southend-on-Sea: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover Southend-on-Sea?
Yes — we survey and quote silicone render in Southend-on-Sea (SS1) and nearby Rayleigh, Canvey Island and South Benfleet, with a fixed written price before any work starts.