Silicone render · Greater Manchester
Silicone render in Atherton
Need silicone render in Atherton? Tell us about the property and we'll arrange a free survey and a written quote. If you're re-rendering in Atherton, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in M46 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Atherton
Postcode, service and a phone number is all we need.
Included as standard
- Water-repellent surface that dries quickly after rain
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
What we look for in Atherton
We also cover Tyldesley and Westhoughton, close to Atherton. It's roughly 11 miles from Atherton to Manchester, the largest town in Greater Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Atherton, either on its own or over insulation.
- Postcode district
- M46
- County or area
- Greater Manchester
- Nation
- England
- Nearby
- Tyldesley, Westhoughton, Leigh, Hindley
Permissions in England
Planning in Atherton follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Atherton
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Atherton: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Atherton?
Yes — we survey and quote silicone render in Atherton (M46) and nearby Tyldesley, Westhoughton and Leigh, with a fixed written price before any work starts.