Silicone render · Kent
Silicone render in Chatham
If you're planning silicone render in Chatham, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On tree-shaded or north-facing walls in Chatham, silicone's water repellence helps it stay cleaner for longer.
- Free survey in ME4 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Chatham
Postcode, service and a phone number is all we need.
Part of every quote
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Vapour-open, so walls can still breathe
Before we quote in Chatham
We also cover Rochester and Gillingham, close to Chatham. Chatham is about 8 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Chatham, either on its own or over insulation.
- Postcode district
- ME4
- County or area
- Kent
- Nation
- England
- Nearby
- Rochester, Gillingham, Strood, Maidstone
Approvals in England
For a house in Chatham, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Chatham
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Chatham: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Chatham?
Yes — we survey and quote silicone render in Chatham (ME4) and nearby Rochester, Gillingham and Strood, with a fixed written price before any work starts.