Silicone render · Kent
Silicone render in Sittingbourne
Need silicone render in Sittingbourne? Tell us about the property and we'll arrange a free survey and a written quote. Silicone suits most rendering jobs in Sittingbourne, either on its own or over insulation.
- Free survey in ME10 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Sittingbourne
Postcode, service and a phone number is all we need.
What the job covers
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
- Vapour-open, so walls can still breathe
- Used as the finish on most EWI systems
What we look for in Sittingbourne
We also cover Gillingham and Chatham, close to Sittingbourne. It's roughly 11 miles from Sittingbourne to Maidstone, the largest town in Kent. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Sittingbourne, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- ME10
- County or area
- Kent
- Nation
- England
- Nearby
- Gillingham, Chatham, Rochester, Maidstone
Approvals in England
For a house in Sittingbourne, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Sittingbourne
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Sittingbourne: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Sittingbourne?
Yes — we survey and quote silicone render in Sittingbourne (ME10) and nearby Gillingham, Chatham and Rochester, with a fixed written price before any work starts.