Silicone render · Kent
Silicone render in Tunbridge Wells
Quotes for silicone render in Tunbridge Wells list the system, the detailing and the VAT position in writing, so you know exactly what's included. If you're re-rendering in Tunbridge Wells, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in TN1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Tunbridge Wells
Postcode, service and a phone number is all we need.
What you get
- Fine, even grain from about 1–2mm
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
- Used as the finish on most EWI systems
Before we quote in Tunbridge Wells
We also cover Tonbridge and Crowborough, close to Tunbridge Wells. Tunbridge Wells is about 14 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Tunbridge Wells, either on its own or over insulation.
- Postcode district
- TN1
- County or area
- Kent
- Nation
- England
- Nearby
- Tonbridge, Crowborough, Sevenoaks, East Grinstead
Planning and building control in England
For a house in Tunbridge Wells, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Tunbridge Wells
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Tunbridge Wells: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover Tunbridge Wells?
Yes — we survey and quote silicone render in Tunbridge Wells (TN1) and nearby Tonbridge, Crowborough and Sevenoaks, with a fixed written price before any work starts.