Silicone render · Merseyside
Silicone render in Formby
Silicone render in Formby: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Silicone suits most rendering jobs in Formby, either on its own or over insulation.
- Free survey in L37 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Formby
Postcode, service and a phone number is all we need.
What the job covers
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
What we look for in Formby
We also cover Crosby and Maghull, close to Formby. Formby sits around 11 miles from Liverpool. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.
Exposure to wind-driven rain varies across Merseyside: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On tree-shaded or north-facing walls in Formby, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- L37
- County or area
- Merseyside
- Nation
- England
- Nearby
- Crosby, Maghull, Southport, Bootle
Permissions in England
Before quoting in Formby, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Formby
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Formby: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Formby?
Yes — we survey and quote silicone render in Formby (L37) and nearby Crosby, Maghull and Southport, with a fixed written price before any work starts.