Silicone render · Scotland
Silicone render in Moray
Quotes for silicone render in Moray set out the system, detailing, access and VAT position in writing. If you're re-rendering in Moray, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey and fixed written price
- Guide price from £66 per m² + scaffold, inc VAT
- Planning and building control checked for Scotland
Free survey in Moray
Tell us the postcode and what you need.
What you get
- Vapour-open, so walls can still breathe
- Through-coloured — no painting needed
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
Homes and walls in Moray
North East Scotland has granite and stone-built homes, harled cottages and post-war estates, with exposed coastal settings along much of it.
Exposure to wind-driven rain varies across Moray: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On tree-shaded or north-facing walls in Moray, silicone's water repellence helps it stay cleaner for longer.
- Nation
- Scotland
- Region
- North East Scotland
- Towns covered
- Elgin, Forres, Buckie, Lossiemouth
- Guide price
- From £66 per m² + scaffold · inc VAT
Approvals in Scotland
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. Listed buildings need listed building consent. Ask your council's planning team before committing.
Work that alters an external wall's construction is covered by the building standards system; many over-cladding projects need a building warrant from the council's building standards team, and Section 6 (Energy) of the Technical Handbooks sets insulation benchmarks.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Moray
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Moray: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover all of Moray?
Yes. We survey and quote silicone render across Moray, including Elgin, Forres, Buckie, Lossiemouth.
Do I need planning permission in Scotland?
In Scotland, householder permitted development rights are set by the Scottish GPDO and are narrower for external wall changes; insulating flats or tenements, changing the appearance of a house noticeably, or working in a conservation area usually needs planning permission. We check your address before quoting.