Silicone render · Northamptonshire
Silicone render in Corby
From Corby to Uppingham, we price silicone render after a measured survey — no guesswork, and no work starts until the price is agreed in writing. On tree-shaded or north-facing walls in Corby, silicone's water repellence helps it stay cleaner for longer.
- Free survey in NN17 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Corby
Postcode, service and a phone number is all we need.
Included as standard
- Can also go straight onto prepared masonry
- Through-coloured — no painting needed
- Used as the finish on most EWI systems
- Water-repellent surface that dries quickly after rain
Corby: walls, weather and approvals
We also cover Uppingham and Kettering, close to Corby. Corby is about 19 miles from Northampton. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.
Much of Northamptonshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Corby, either on its own or over insulation.
- Postcode district
- NN17
- County or area
- Northamptonshire
- Nation
- England
- Nearby
- Uppingham, Kettering, Market Harborough, Oakham
Permissions in England
Before quoting in Corby, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Corby
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Corby: questions
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Corby?
Yes — we survey and quote silicone render in Corby (NN17) and nearby Uppingham, Kettering and Market Harborough, with a fixed written price before any work starts.